System information

Getting Started
MicroVAX 3100 Models 88/98 User Information
2-19
If you are connecting a peripheral using DEC423 cables, refer to Figure 2-15 and follow
these steps: Set the ON/OFF switch on the peripheral to the OFF (O) position.
a) Connect the EIA-232 to DEC423 adapter to the asynchronous modem control port.
b) Tighten the screws on each side of the adapter using a small screwdriver.
c) Connect the DEC423 cable to the MMJ port on the adapter.
d) Connect the other end of the DEC423 cable to the correct port on the peripheral.
e) Set the ON/OFF switch on the peripheral to the ON (l) position.
MLO-013619
Figure 2-15 Connecting a DEC423 Connector to the Asynchronous Port