System information

Getting Started
MicroVAX 3100 Models 88/98 User Information
2-15
Connecting a SCSI Cable or the SCSI Terminator
To connect the SCSI terminator, follow these steps:
1. If you have an external small computer system interface (SCSI) interface or SCSI
storage box, connect the SCSI cable to the SCSI port on the rear of the system,
otherwise install the SCSI terminator (supplied with your system). Figure 2-12 shows
an example of the SCSI terminator connection. See the section on SCSI Termination
in Chapter 3 for additional information.
MLO-013623
Figure 2-12 Connecting the SCSI Terminator