System information

Getting Started
MicroVAX 3100 Models 88/98 User Information
2-7
________________________WARNING __________________________
Do not attempt to modify or use an external 115V AC power cord for 230V
AC input power. Modifying the power cord can cause personal injury and
severe equipment damage.
____________________________________________________________
Power cords supplied with the MicroVAX 3100 Model 88 and Model 98 System meet the
following criteria:
• The cords set for North America are UL-listed/CSA-certified, and rated 120VAC, 10A
minimum.
• In Europe, the cordage carries the <HAR> mark. See Table E-5, Appendix E for
ratings.
• The cordage is terminated in a grounding-type plug and must have approvals showing
it is suitable for use within the region.
• The connector at the equipment end must be an IEC320
1
-type CEE
2
style 14
connector.
• The cord length does not exceed 4.5 m (14.5 ft).
Installing Your System
The MicroVAX 3100 Model 88 and Model 98 System Installation Information you received
with your system graphically outlines the steps to follow to install your system.
1. Make sure you received all of your system components. Use Appendix G, Equipment
Log, to list your equipment. If something is missing, please contact your distributor or
Digital representative.
2. Position your system so that air can flow freely to and from the vents. Figure 2-6
shows the airflow from the front and rear of the system.
1
International Electrotechnical Commission.
2
International Commission for Conformity Certification of Electrical Equipment.