System information

Getting Started
2-6
MicroVAX 3100 Models 88/98 User Information
3. Insert the end of the hasp with the hole in it through the slot on the rear of the
enclosure.
4. Place the other end of the hasp securely behind the slot on the rear panel.
You may use a lock through the hasp, or use a chain or cable lock through the hasp to
secure the system to a table. Refer to Figure 2-5.
ML013514
Figure 2-5 Installing the Hasp
Identifying the Correct AC Power Cord
Your MicroVAX 3100 Model 88 and Model 98 System comes equipped the proper AC
power cord. However, because variations exist from one country to another, MicroVAX
3100 Model 88 and Model 98 and systems may be moved, inspect your power cord to
ensure that it is the correct one for your country or region. If you are not sure that the
supplied AC power cord is correct, contact your authorized Digital service representative
or distributor before you use it. Refer to Appendix E, Table E-5, for list of cables.