System information

Getting Started
2-4
MicroVAX 3100 Models 88/98 User Information
If you wish to use your MicroVAX 3100 Model 88/98 system in its desktop configuration,
you must first remove the front door.
1. With the door open, push on each hinge, as shown, to disengage them. Lift the door
away. See Figure 2-3.
MLO-013607
Figure 2-3 Removing the Front Door
2. Set the system down with the power button on the bottom left as shown in Figure 2-2.
3. Place the front door in a secure location. You may wish to use the system in its tower
configuration at some other time.
Locking Your System
Your MicroVAX 3100 Model 88 or Model 98 system may be locked and/or secured to a
desk or table using a lockdown hasp. Follow these instructions and see Figure 2-4 to
expose and install the hasp.