System information

MicroVax 3100 Models 88/98 User Information F-1
F
Setting SCSI IDs
Selecting Available SCSI IDs on the System
Each internal or external SCSI device must have a unique SCSI ID, including all devices
in a SCSI expansion box. Devices have default SCSI IDs set at the factory before they are
shipped. If the default ID of a device is occupied, you must reset the SCSI ID of the device
to an unused ID. See the documentation supplied with the device or expansion box for
information on setting the SCSI IDs.
There are eight SCSI IDs, numbered from 0 to 7. Table F-1 lists the recommended SCSI
Ids for various devices. To identify which SCSI IDs are not occupied before connecting a
new device or an expansion box, use the configuration display.
To see the configuration display, enter the following command:
>>> ..SHOW CONFIG
The system displays information similar to the following:
KA58-A OR KA59-a V1.0, VMB 2.16
08-00-2B-2B-16-91
64MB
TstNbr DevNam Info
------ -------- --------------------------
0 CPU_BD OK
A8 MEMORY OK
E4 DZ OK