System information

Console Commands
MicroVax 3100 Models 88/98 User Information
A-21
SCSI Shows any SCSI devices in the system
(disk drives, or compact disc drives,
for example).
SCSI_ID Shows the SCSI ID of the SCSI
controller(s).
TRANSLATION Shows any virtual addresses that map
to the specified physical address. The
firmware uses the current values of
page table base and length registers to
perform its search. It is assumed that
page tables have been properly built.
VERSION Displays the current firmware version.
________________________ CAUTION___________________________
If you enter the CONFIG command, the configuration data is read from
memory. Under certain conditions the configuration data in memory may
become corrupt. You can correct the corrupted configuration data by
running the test A1. See page A-23 for more information about the TEST
command.
____________________________________________________________
Qualifiers: Listed in the previous parameter descriptions.
Examples:
>>>
>>> SHOW BFLAG
00000220
>>>
>>> SHOW BOOT
DKA300
>>> SHOW ETHERNET
Ethernet Adapter
-EZA0 (08-00-2B-0B-29-14)
>>>
>>> SHOW HALT
restart
>>>
>>> SHOW LANGUAGE