System information

Console Commands
A-20
MicroVax 3100 Models 88/98 User Information
>>> SET HALT RESTART
>>>
>>> SET SCSI_ID B 7
SHOW
The SHOW command displays the console parameter you specify.
Format:
SHOW {parameter}
Parameters:
BFLAG Displays the default R5 boot flags.
BOOT Displays the default boot device.
CONFIG Displays a list of the devices and
optional modules present in the system
and the status of the hardware. See
the CAUTION below.
DEVICE Displays all devices in the system.
ERROR Displays the errors detected during the
power-up tests.
ETHERNET Displays the system hardware Ethernet
address.
HALT Shows the user-defined halt action.
LANGUAGE Displays console language and
keyboard type.
MEMORY Displays main memory configuration
board by board.
PSE Displays the condition of the console
security feature of the system.
RECALL Shows the current state of command
recall, either ENABLED or
DISABLED.
SAVED_STATE Displays the values of non-volatile
console parameters, such as BOOT,
BFLG, and SCSI_ID.