System information

Console Commands
MicroVax 3100 Models 88/98 User Information
A-19
• 13 -- Português
• 14 -- Suomi
• 15 -- Svenska
PSE Allows you to enable or disable the console security feature of
the system. The SET PSE command accepts the following
values:
• 0 -- Console security disabled
• 1 -- Console security enabled
When the console security feature is enabled, only a subset of
the console commands are available to the user. These
commands are listed in. To enable the complete set of console
commands once the console security feature is enabled, you
must use the LOGIN command.
PSWD Allows you to set or change the console security password..
RECALL Sets command recall state to either ENABLED (1) or
DISABLED (0).
SCSI_ID Sets the SCSI ID of the SCSI controller to a number in the range
0 to 7. The SCSI ID of the SCSI controller is set to 6 before the
system is shipped. Use A X to change the on-board SCSI
controller ID or B X to change the optional SCSI controller ID.
Qualifiers: Listed in the parameter descriptions above.
Examples:
>>>
>>> SET BFLAG 220
>>>
>>> SET BOOT DKA300
>>>
>>> SET LANGUAGE 5
>>>