System information

Console Commands
A-18
MicroVax 3100 Models 88/98 User Information
SET
The SET command sets the parameter to the value you specify.
Format:
SET {parameter} {value}
Parameters:
BFLAG Sets the default R5 boot flags. The value must be a hexadecimal
number of up to eight digits.
BOOT Sets the default boot device. The value must be a valid device
name or list of device names as specified in the BOOT
command description.
HALT Sets the user-defined halt action. Acceptable values are the
keywords "default", "restart", "reboot", "halt", "restart_reboot",
or a number in the range 0 to 4 inclusive.
LANGUAGE Sets the console language and keyboard type. If the current
console terminal does not support the multinational character
set (MCS), then this command has no effect and the console
message is displayed in English. Values are 1 to 15, as follows:
• 1 -- Dansk
• 2 -- Deutsch (Deutschland/Österreich)
• 3 -- Deutsch (Schweiz)
• 4 -- English (United Kingdom)
• 5 -- English (United States/Canada)
• 6 -- Español
• 7 -- Français (Canada)
• 8 -- Français (France/Belgique)
• 9 -- Français (Suisse)
• 10 -- Italiano
• 11 -- Nederlands
• 12 -- Norsk