System information

Diagnostic Tests and Commands
MicroVAX 3100 Models 88/98 User Information
5–17
>>>
Error Information -- Write down this information before you contact your Digital
services representative.
Error Display
You can use the error display to display certain errors detected during the last power-up
test or diagnostic utility. To see the error display, enter the following command:
>>>
SHOW ERROR
The system responds with a display similar to the following:
?? 001 CPU_BD 0000
B_Cache Test_35 Subtest_33 Loop_sub_27 Error_type_FF
NVAX Test_54 Subtest_00 Loop_sub_01 Error_type_FF
?? 001 DZ 0030
010 0001 00000031 00000020 00000000 00000002 00000000 0000F1F0
Test_E4 Subtest_02 Loop_sub_00 Error_type_FF
?? 020 COMM 0112
005 0014 001E001E 0F0F0311 01010002 00000000 0008001E 80000002 00000000
Write down this information before you contact your Digital Services representative.
Contacting Digital Services
If you have followed the procedures in this chapter but the problem remains unsolved,
your Digital services representative can help you. Before you place your call, follow these
steps:
1. Write down a description of the problem, including the error messages and the number
of the tests or utilities that failed.