System information

Installing Hardware Options
3–10
VAX 4000 Model 108 User Information
To install either 3.5-inch optional drives (with mounting bracket attached), or 5.25-inch
devices in the front drive bay, follow these steps.
1. Turn off the system, unplug the power cord and remove the cover.
2. Set the SCSI drive device jumpers or switches for the desired SCSI ID (address). This
address depends on the unit numbers currently in use. (See Appendix F, Setting SCSI
IDs, for a list of typical SCSI ID assignments. Appendix G, Equipment Log, contains
space to record your systems SCSI ID assignments.) Follow the guidelines in the
manual that came with the drive.
3. Remove the enclosure front bezel by pushing on the inside tab and lifting it up and
away from the front of the enclosure.