System information

Getting Started
2-30
VAX 4000 Model 108 User Information
MLO-013683
1
Figure 2-24 Connecting a TriLink Adapter to the Optional KFDDA Port
Connecting a DSSI Device to the TriLink Adapter on the Optional KFDDA Port
The TriLink adapter can be connected to separate DSSI devices which are themselves
terminated, or looped out through one connector, through two DSSI devices/clusters, and
back to the other TriLink connector.
Each of the two connectors on the TriLink adapter must be either connected or terminated.
To connect the TriLink adapter, follow the steps below:
1. Set the on/off switch on the device to the off (O) position.
2. Connect the DSSI cable.
3. Set the on/off switch on the peripheral(s) to the on (l) position.