System information

Getting Started
2-26
VAX 4000 Model 108 User Information
Connecting the TriLink Adapter to the KFDDA DSSI Port
The VAX 4000 108 comes with a KFDDA DSSI port at the bottom of the I/O receiver and
a TriLink adapter which is to be connected to it. The DSSI port or a device connected to it
must be terminated if you do not choose to use the TriLink adapter.
To connect the TriLink adapter to the KFDDA DSSI port (the bottom one), follow these
steps:
1. Seat the adapter onto the DSSI connector; it is keyed so that it can only be seated
right-side up.
2. Turn the thumbscrews clockwise to secure the adapter
MLO-013667
1
Figure 2-20 Connecting the TriLink Adapter