System information

Getting Started

VAX 4000 Model 108 User Information

2-21

2. Make sure that the 120-pin-to-2x36-pin cable supplied with your DHW42-BB is

installed (Figure 2-17 item ).

3. Connect the straight connector of the BC16C-10 cable to one of the asynchronous

cable ports on the back of the system unit (Figure 2-17 item ).

4. Close the bail lock loops on each side of the connector.

5. Connect the angled connector of the BC16C-10 cable to the H3104 harmonica.

6. Close the bail lock loops on each side of the connector.

7. Connect one end of a DEC423 cable to one of the eight MMJ ports on the harmonica.

8. Connect the other end of the DEC423 cable to a DEC423 port on the peripheral.

9. Set the on/off switch on the peripheral to the on (l) position.

MLO-013677

Figure 2-17 Connecting to a DHW42-BB Asynchronous Port