System information

HSD10 Operation
4-34
VAX 4000 Model 108 User Information
Table 4-10 SCSI Port Error Codes
Code Status
2000 A serious problem occurred within the internal synchronization mechanism
4002 Internal inconsistency error; tried to send an unsupported SPORT opcode
4007 Internal inconsistency error; tried to send an unsupported message
8000
Null reselect; target issued a reselect command, which the HSD10 had no reason to
expect
8001
A target reselected the HSD10 for a tagged command, but the tag number did not
match any stored in the HSD10
8003
Double check condition encountered; check condition status returned on a Request
Sense due to previous check condition status
8004 Unsupported SCSI status returned by target
8005 Unsupported message received
8006 Target rejected a nonrejectable message (for example, Identify)
8008 Phase transition time-out
8009 Gross error bit was set in SCSI chip
800A Parity error bit was set in SCSI chip
800B Illegal command bit was set in SCSI chip
800C Device does not exist; 250 millisecond SCSI time-out
800D
Illegal disconnect; target disconnected during data-out, data-in or message-out phase
800E Hung bus time-out; target connected to the bus for more than 30 seconds
800F Device did not go bus-free after device reset, abort, abort tag or clear queue
8010 SCSI bus reset detected
8011 Disconnected device time-out
8012 Reselect tag number not outstanding
8013 Reserved
8014 Device transitioned to DIN phase, but firmware expected DOUT
8015 Device transitioned to DOUT phase, but firmware expected DIN
8016 Reselector's ID bit not set