Instructions / Assembly

10. Note: The 400, 500 and 700 UTV’s use the same mounting plate. However, the 500 and
700 have built-in nuts welded on the other side of the front plate.
11. Use 2 pcs #25 (Bolt 10mm x 40mm), 2 pcs #26 (Split Washer 10mm), and #27 (Washer
10mm) to attach the #23 (Bracket Mounting Plate) to the front plate of the frame.
12. On the 400 you will have to reach behind the front plate and hold the nut in place while
the mounting bracket is being attached to the UTV. Again the 500 and 700 have the nuts
welded on the other side of the front plate (see the photos for both).
13. Now it is easy to drive up the snow plow, aligned the snow plow mounting holes with
the holes in the #23 (Bracket Mounting Plate) and use the #24 (Wire Lock Pins) to secure
the plow to the Mounting Plate.