Use and Care Manual

Periodic Service
10-7
① Range gear shift lever pivot (spray type grease )
■ Checking engine start system
CAUTION
TO avoid personal injury
 Do not allow anyone near the vehicle while
testing.
 If the vehicle does not pass the test, do
not operate the vehicle.
◆ Preparation before testing
1. Place all control levers in the “NEUTRAL”
position.
2. Set the parking brake and stop the engine.
◆ Test gear shift range lever safety switch
1. Sit on the operator’s seat.
2. Shift the range gear shift lever to: “F”, “N” or
REVERSE position.
3. Turn the key to “START” position.
4. The engine must not crank.
5. If it cranks consult your local dealer for this
service.
① Range gear shift lever
■ Checking wheel bolt torque
CAUTION
To avoid personal injury
 Never operate vehicle with a loose
wheel bolts.
 Any time these bolts are loosened they
should be retightened to the specified
torque.