Use and Care Manual

Periodic Service
10-4
Checking Coolant Level
CAUTION
TO avoid personal injury
Do not remove radiator cap while coolant
is hot, when cool, slowly rotate to the first
stop and allow sufficient time for excess
pressure to escape removing the cap
completely.
1. Park the vehicle on a flat surface, access the
panel under the hood, set the parking brake, and
shut off the engine.
2. Check to see that the coolant level is between
the “FULL” and” LOW” marks of recovery tank.
3. When the coolant level drops due to
evaporation, add water only up to the full level. In
case of leakage add anti-freeze and water in the
specified mixing ratio up to the full level.(see flush
cooling system and changing coolant in EVERY 2
YEARS in PERIODIC SERVICE section)
Recovery tank
FULL
LOW
IMPORTANT
If the radiator cap has to be removed,
follow the cautions above and securely
retighten the cap.
Use clean fresh water and anti-freeze to fill
the recovery tank.
If water should leak, consult your local
HSUN Dealer.
Cleaning radiator screen
CAUTION
TO avoid personal injury:
Be sure to stop the engine before
removing the screen
1. Park the vehicle on a flat surface,
2. Remove the radiator cover,
3. Detach the screen and remove all foreign
materials,
Radiator screen
IMPORTANT
Radiator screen must be cleaned from
debris to prevent engine from overheating