Instructions / Assembly

ATV Mount Bracket - 550cc ~ 1000cc
PART # 732001150400
Fastener Components:
Qty. Part Description
4................. U Bolts
8.................
M8 Flat Washers
8.................
M8 Lock Washers
INSTALLATION INSTRUCTIONS:
1. Remove both front and middle protection cover
from frame (A). Set protective covers to the side.
Shown in Figure 1.
2. Place the Plow Mount up against the frame so
that the frame will be centered between the holes
but as far toward the front of the ATV as
possible.
3. Install U-bolts and hardware. (Figure 2)
4. You can align the protective covers back up and
drill 3/4" holes so that when the covers will
secure back to the frame.
Figure 1
A
10MM BOLTS AND NUTS TORQUE TO 20-25 F
T.LBS.
8.................
M8 Hex Nuts
Figure 2