Instructions / Assembly

Utility Mount Bracket - 450cc ~ 1000cc
PART # 732001150300
Fastener Components:
Qty. Part Description
4................. M10x1.25x30mm Hex Bolt
4................. M10 Lock Washer
4................. M10 Flat Washers
INSTALLATION INSTRUCTIONS:
1. Locate and remove bolts (A) on the lower part of
the front bumper. Shown in Figure 2.
2. Slide the plow mount between the bumper and the
frame. Line it up and attach using the hardware
provided in slots (B) underneath the frame shown
in Figure 3. Loosely tighten bolts.
3. With the hardware provided reattach the bumper
to the frame going through the mount slots (C).
Shown in Figure 4.
4. Center the mount and tighten all hardware down
evenly.
Figure 3
Figure 4
Figure 2
B
A
A
C
10MM BOLTS AND NUTS TORQUE TO 20-25 FT.LBS.