Operating instructions

Vector Control Chassis Type Frequency Converter Parameterizing steps

SIEMENS AG 476 869 4070 76 J AB-74

SIMOVERT MASTERDRIVES Operating Instructions 9-1

9 Parameterizing steps

In general, parameterization can be subdivided into the following main

steps:

1. Power section definition (P060) = 8)

2. Board definition (P060 = 4)

3. Drive definition (P060 = 5)

4. Function adjustment.

Not all parameterizing steps have to be run through in detail in each

case during start-up. It is possible under certain conditions to combine

some of the steps and shorten parameterization by using quick

procedures. The following quick procedures are possible:

1. Parameterizing with user settings

(Fixed setting or factory setting, P060 = 2)

2. Parameterizing with existing parameter files

(Download, P060 = 6)

3. Parameterizing with paramater modules

(Quick parameterization, P060 = 3)

Depending on the specific prevailing conditions, parameterization can

be carried out either in detail or in accordance with one of the specified

quick procedures.

By activating a fixed setting (P060 = 2), the parameters of the unit can

also be reset to the original values.

Detailed

parameterization

Quic

parameterization