user manual

Choose digital modulation systems with R&S WinIQSIM™
1
OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks
SMATE-K11 Dig. Std. IS-95 SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K12 Dig. Std. CDMA2000 SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K13 Dig. Std. 3GPP TDD SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K14 Dig. Std. TD-SCDMA SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K15 User-Defined OFDM Signals SMATE-B10 or B11 - SW
With WinIQSIM™ and WinIQOFDM
SMATE-K17 Dig. Std. 1xEV-DO SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g) SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K20 Dig. Std. 3GPP incl. HSDPA SMATE-B10 or B11 - SW
With WinIQSIM™
Choose noise OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks
SMATE-K62 Additive White Gaussian
Noise (AWGN)
SMATE-B13 - SW
Note: Digital modulation systems and noise can be used either in baseband path A or baseband path B. The digital modulation systems or noise will be required twice
only if the baseband paths are used simultaneously. (For example, an instrument is equipped with one R&S SMATE-K40 and two R&S SMATE-B10. In this con-
figuration, R&S SMATE-K40 can be used either on baseband path A or baseband path B. For simultaneous use on both baseband paths, R&S SMATE-K40 would
be required twice.)
As only one set of Differential I/Q outputs SMATE-B16 can be installed, they can be switched to path A or B like the I/Q-outputs.
1
R&S WinIQSIM™ requires an external PC.
Vector Signal Generator R&S SMATE200A 9