user manual

Step e Configure baseband path A OPTIONAL
Choose baseband source MANDATORY
Option Description Requires Not compatible with HW or SW Remarks
SMATE-B13 Baseband Main Module SMATEB10x - HW Factory-installed. Requires SMATE-B10, SMATE-
B11 or SMATE-K62.
SMATE-B10 Baseband Generator with
ARB and Digital Modulation
SMATE-B13
(in baseband path A)
SMATE-B11
(in baseband path A)
HW Factory-installed
SMATE-B11 Baseband Generator with
ARB (16 MSamples) and
Digital Modulation
SMATE-B13
(in baseband path A)
SMATE-B10
(in baseband path A)
HW Factory-installed
Choose baseband hardware OPTIONAL
SMATE-B16 Differential I/Q Output SMATE-B10 or B11
(in baseband path A)
HW Can only be installed only once.
Factory-installed
Choose digital modulation systems OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks
SMATE-K40 Dig. Std. GSM/EDGE SMATE-B10 or B11 - SW
SMATE-K42 Dig. Std. 3GPP FDD SMATE-B10 or B11 - SW
SMATE-K43 3GPP enhanced MS/BS tests
incl. HSDPA
SMATE-K42 - SW
SMATE-K46 Dig. Std. CDMA2000 SMATE-B10 or B11 - SW
SMATE-K61 Multicarrier CW Signal Gen-
eration
SMATE-B10 or B11 - SW
Choose digital modulation systems with R&S WinIQSIM™
1
OPTIONAL
Option Description Requires Not compatible with HW or SW Remarks
SMATE-K11 Dig. Std. IS-95 SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K12 Dig. Std. cdma2000 SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K13 Dig. Std. 3GPP TDD SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K14 Dig. Std. TD-SCDMA SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K15 User-Defined OFDM Signals SMATE-B10 or B11 - SW
With WinIQSIM™ and WinIQOFDM
SMATE-K17 Dig. Std. 1xEV-DO SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K19 Dig. Std. IEEE 802.11 (a/b/g) SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K20 Dig. Std. 3GPP incl. HSDPA SMATE-B10 or B11 - SW
With WinIQSIM™
SMATE-K5 Bluetooth SMATE-B10 or B11 - SW With application software on an external PC
1
R&S WinIQSIM™ requires an external PC.
Vector Signal Generator R&S SMATE200A 7