user manual

Configuration Examples
The modular design of the R&S SMATE200A allows the instrument to be equipped with up to two paths. This allows a multitude of applications to be performed for which
several signal generators were previously required.
One baseband generator and one RF path
Instrument configuration
Option Installed Description
SMATE200A 1x Base unit
SMATEB10x 1x Frequency option
SMATE-B13 1x Baseband main module
SMATE-B10 1x Baseband generator
Application example
¾ Generation of digitally modulated signals
One baseband generator and two RF paths
SMATE
B10
x
SMATE
-
B10
SMATE
-
B13
SMATE-B10 SMATE-B13 SMATEB10x
SMATE
-
B13
SMATE
B20
x
Instrument configuration
Option Installed Description
SMATE200A 1x Base unit
SMATEB10x 1x Frequency option 1st RF path
SMATEB20x 1x Frequency option 2nd RF path
SMATE-B13 2x Baseband main module
SMATE-B10 1x Baseband generator
Application example
¾ Interference test with same digital signal
¾ Simulation of antenna diversity
Vector Signal Generator R&S SMATE200A 10