System information

Host Operation
71
Effects tab
Graphical effects on the Host screen during remote control connections can be
configured through settings on the Effects tab. By disabling visual effects, for example,
the amount of screen data that is captured and transmitted over the network can be
greatly reduced, improving speed and performance.
Choose one of three options to determine whether or not visual effects should be
disabled:
 Enable visual effects on the Host computer: Select Never disable effects to keep
current visual effects settings on the Host in place.
 Allow the Master user to disable some or all visual effects on the Host computer:
Select Upon request, permit Master to disable selected effects (this is default option).
Check any options under Visual Effects which you want the Master user to have control
over.
 Disable some or all visual effects on the Host computer whenever a remote control
connection is made: Select Always disable the selected effects. Check any options under
Visual Effects which you want the Master user to have control over.
The particular visual effects that are enabled or disabled are controlled by the settings
you check under Visual Effects: