System information

PC-Duo Host Guide
130
PHSETUP protocol parameters
The following PHSETUP parameters correspond to the "Protocols tab" settings in the
Host.
Parameter
Definition
encryption:on
encryption:off
Set to on to encrypt all remote data
exchanges.
Otherwise set to off.
ip:on
ip:off
Specify whether (on) or not (off)
this Host computer „listens‟ on the
UDP/IP protocol, or accepts
connections on that protocol. Specify
ipport when you set this on.
ipport:number
Set the port number for IP usage. The
value number is an unsigned
hexadecimal, octal, or decimal short
integer.
For example:
• The number 10 = “10” (decimal),
“012” (octal), or “0xA”
(hexadecimal).
• The number seventy-two = “72”
(decmimal), “0110” (octal), or
“0x48” (hexadecimal).
• The number one hundred ten =
“110“(decimal), “0156” (octal), or
“0x6E” (hexadecimal).
Set to 0 to use the default port.
ipx:on
ipx:off
Specify whether (on) or not (off)
this Host computer supports the IPX
protocol. Specify ipxport when you
set this on.
ipxport:number
Set the port number for IPX usage.
The value number is an unsigned
hexadecimal, octal or decimal short
integer.
For example:
• The number 10 = “10” (decimal),
“012” (octal), or “0xA”
(hexadecimal).
• The number seventy-two = “72”
(decmimal), “0110” (octal), or
“0x48” (hexadecimal).
• The number one hundred ten =
“110“(decimal), “0156” (octal), or
“0x6E” (hexadecimal).
Set to 0 to use the default port.