System information

Command Line Configuration
125
removegateway:
“ protocol|port ”,
“ station_specifier
”
Remove a specified Gateway to which
the Host is configured to report. You can
use the following values:
protocol = TCP, UDP, SSL or
IPX
NOTE: You can also specify the port,
as in “ addgateway:
“protocol|port”,
“station_specifier” ”.
station_specifier = a
protocol-dependent
specification for the
station:
UDP/IP or TCP/IP
• network_address
• station_name
• dns_name
IPX
• @node
• @network:node
• station_name
• network:station_name
NOTE: Specify the
station_specifier in quotes.
Separate the protocol and the
station specifier with a
comma.
removegateway: all
Eliminate all the Gateways from the list of
the Gateways to which the Host is
configured to report.
resetgateway:
“ protocol|port ”,
“ station_specifier
”
Reset the security model for the specified
Gateway to zero ("original model, or will
negotiate with Gateway"). This keyword
can be used to script the resetting of the
security model to clear the
"0xC004C009" error.
See removegateway for information on
value options.
resetgateway: all
Reset the security model for all
Gateways to which PC-Duo Host is
configured to report to zero ("original
model, or will negotiate with Gateway").