Installation guide

Deployment Tool Operation
51
Protocols tab
Access Restriction Addresses: Sets the TCP/IP restricted addresses
Access Restriction Mode: Sets "Grant" or "Deny" access to the Host based on TCP/IP
addresses specified by "tcprestrictions"
Enable IPX Protocol: Allow access to Host through IPX configuration
Enable TCP Protocol: Allow access to Host through TCP configuration
Enable UPD/IP Protocol: Allow access to Host through UDP configuration
Encrypt Connection: Turn on encryption, as defined in Preferred Ciphers, for
connections to this Host
Port Number for IP: Allow access through IP protocol using this port number
Port Number for IPX: Allow access through IPX protocol using this port number
Port Number for TCP: Allow access through TCP protocol using this port number
Preferred Ciphers: Use ciphers in order of specification in this list for encrypting
connections to this Host
Screen tab
Allow Kernel Mode screen capture: Allow Gateway connections to use kernel-mode
screen capture driver, even if user-mode driver is preferred.
Attach Mirror Driver at Startup: Attach kernel-mode driver to the desktop when Host
service starts up to avoid screen flashing (applies when Allow Kernel Mode screen
capture option is enabled)
Prefer User Mode screen capture: Uses user-mode driver to capture screen data.
This is the default option on all platforms.
Select User Mode Profile: Create your own user mode profile with the following
bandwidth throttling options:
Description string: Enter a name for this custom profile
Image type: Current default value is “JPEG”
Image compression quality: Specify a numeric value between 1-100, with 100
being best quality
Polling frequencies (three values -- Capture Rate, Foreground, and
Background, in milliseconds): Specify three values on a scale of 1 to 10, with 1
being the least aggressive (longest time), and 10 being the most aggressive
(shortest time).
Bandwidth limit: Specify a numeric value between 5-200 kilobytes/sec, or -1
for unlimited.
Security tab
Administration Password: Sets simple password required for administration, if
Windows Authentication isn't used.
Administration Password Required: If "same", then the connection password is used
for administration access and any Administration Password setting is ignored. If
"different", then the Administration Password is used for administration access.
Administration Security: Specify PC-Duo Host administrative security settings when
you use Windows security for remote connections.