Installation guide

Deployment Tool Operation
47
For the PC-Duo Host product, you can also choose New > Terminal Services
Configuration. This configuration file will be applied to the Terminal Services Template
instead of the standard root Host settings.
Note: Some Host settings do not apply to the Terminal Services Template, and will
appear disabled on the right-hand side of PC-Duo Deployment Tool.
Create custom configurations
After creating a named configuration for PC-Duo Host, Master, or Gateway, any options
can be modified.
To modify a configuration in PC-Duo Deployment Tool, follow these steps: PC-Duo
Deployment Tool Guide
1 Select the configuration to modify. All configurations parameters are listed on the right-
hand side of PC-Duo Deployment Tool.
2 Double-click the configuration parameter you want to modify. When a properties dialog
appears, select any options you want. If you select Use current value or installation
default, then the parameter is assigned according to the following:
 If an existing installation with a configured value for this parameter already exists (for
upgrades), the existing installation parameter value is retained.
 The default installation configuration options for the selected parameter are used either
when an existing installation does not yet have a value for this parameter or for new
installations.
3 Click OK when you are done.
See the following topics:
 “Configuration options for the Master”
 “Configuration options for the Host”
 “Configuration options for the Gateway”
Configuration options for the Master
Modify the following configuration options for PC-Duo Master:
 Add/Remove in Control Panel: Set this option to Disable to prevent users from
modifying the PC-Duo Master configuration.
 Installation Directory: Specify an installation directory other than the default.
 License: Specify your product license here. Note that the Master does not use a
“version upgrade” license, so only one license key is required – your full product or
subscription upgrade key. Keys from previous versions are not accepted by the Master,
and should not be entered.
 Organization: Change the organization name that is shown when you select Help >
About PC-Duo Master.
 Restart after Installation: After installing with PC-Duo Deployment Tool, PC-Duo
Master reboots only if necessary. If a reboot is required, it occurs without any prompts.
You can suppress the automatic reboot without prompting by selecting Use this value and
the Reallysuppress option.
 User Name: Change the licensee name from the default (Windows) user name with
this option. This is the registered user name that is displayed when you select Help >
About PC-Duo Master.