System information

88
 If you do not know the station name and/or address of the PC-Duo Gateway to which
you want to connect, click Find Gateway. The Find Gateway Wizard appears. Follow the
instructions on the wizard and click Finish when you are done.
 If you know the station name and/or address of the PC-Duo Gateway to which you
want to connect, follow these steps:
i Select the protocol to use from this list.
ii Specify the port number if it is not standard (default standard port is 2303).
iii Type the DNS name, PC-Duo Gateway name or network IP address in the Station
Specifier field. See “PHSETUP Gateways parameters” for more information on the
protocol-specific syntax for station specifiers.
iv If you are trying to reach a PC-Duo Gateway outside the PC-Duo Gateway network,
make sure that either option (2) or (3) below is selected so that a firewall-friendly reverse
connection with the Host can be established:
(1) Never keep reverse connection to this Gateway server. Select this option when
the Host and PC-Duo Gateway are on the same LAN and the PC-Duo Gateway
can easily establish a remote control connection to the Host when necessary.
(2) Always keep an reverse connection to this Gateway server. Select this option
when the Host is not easily accessible to the PC-Duo Gateway, e.g. is behind a
firewall and/or router with a Net Address Translation (NAT) table. The Host will use
a reverse connection to maintain communication with the PC-Duo Gateway. By
having the Host establish a reverse connection to the PC-Duo Gateway, the PC-