System information

Host Operation
 Select No permission required (default) to allow remote control connections to your
Host computer from any authenticated PC-Duo Master user at any time.
 Select Permission must be granted by Host if you want to grant an authenticated PC-
Duo Master user explicit permission to connect to your Host computer. From the Host‟s
user must respond within drop-down list, select the time (10 seconds, 30 seconds, 1
minute, or 2 minutes) within which you want to make a decision. If you do not respond
within the specified time, the request is rejected automatically.
 Select Permission requested from Host if you want to grant an authenticated PC-Duo
Master user explicit permission to connect to your Host computer but you don‟t want it to
be mandatory. If you do not respond within the specified time, the request is accepted
automatically.
NOTE: These conditions apply to both peer-to-peer and Gateway-managed connections.
Permission for connection
If Permission must be granted by Host or Permission requested from Host is selected in the
Access tab, the Request Permission for Remote Desktop Window appears when a PC-Duo Master
user attempts to connect to your Host computer.
If Connection Permission is set to Permission must be granted by Host, then the PC-Duo
Host user must respond within the time period or the connection request will be rejected.
Even if one of these two options is selected in the Access tab, the Request Permission
for Remote Desktop Window can be suppressed on the Host if the Bypass Connection
Permission option is selected in the Permission Entry window under Advanced Security
Settings (see “Service Security tab”).
If Lock workstation if permission not explicitly granted is selected (default = enabled), the
Host will lock the workstation prior to beginning the new remote control connection. This
prevents the new user from "hijacking" the logged-in user's session unless he/she knows
the credentials to unlock it.