System information

Command Line Configuration
removegateway:
“ protocol|port
”,
“ station_speci
fier ”
Remove a specified Gateway to which PC-Duo
Host is configured to report. You can use the
following values:
protocol = TCP, UDP, SSL or IPX
NOTE: You can also specify the port, as in
“ addgateway: “protocol|port”,
“station_specifier” ”.
station_specifier = a protocol-
dependent specification for the
station:
UDP/IP or TCP/IP
• network_address
• station_name
• dns_name
IPX
• @node
• @network:node
• station_name
• network:station_name
NOTE: Specify the station_specifier
in quotes. Separate the protocol and the
station specifier with a comma.
removegateway:
all
Eliminate all PC-Duo Gateways from the list of
PC-Duo Gateways to which PC-Duo Host is
configured to report.
resetgateway:
“ protocol|port
”,
“ station_speci
fier ”
Reset the security model for the specified
Gateway to zero ("original model, or will negotiate
with Gateway"). This keyword can be used to
script the resetting of the security model to clear
the
"0xC004C009" error.
See removegateway for information on value
options.
resetgateway:
all
Reset the security model for all Gateways to
which PC-Duo Host is configured to report to
zero ("original model, or will negotiate with
Gateway").