System information

120
PHSETUP Gateways parameters
The following PHSETUP parameters correspond to the "Gateways tab" settings in PC-Duo
Host.
Parameter
Definition
requiregateway: yes
Set to yes to require that all remote control
connections to this Host computer pass
through a PC-Duo Gateway.
Set addgateway when you use this
setting.
Set to no (default behavior) to allow peer-
to-peer remote control connections that do
not pass through a PC-Duo Gateway.
addgateway:
“ protocol|port ”,
“ station_specifier ”
Add a specified Gateway to which PC-Duo
Host can report. You can use the following
values:
protocol = TCP, UDP, SSL or
IPX
port (optional) = a valid port
number if you do not use the
standard port
station_specifier = a
protocol-dependent
specification for the
station:
UDP/IP or TCP/IP
• network_address
• station_name
• dns_name
IPX
• @node
• @network:node
• station_name
• network:station_name
NOTE: Specify the protocol|port pair in
quotes when you specify the port, and
specify the station_specifier in quotes.
Separate the protocol|port and the
station_specifier with a comma.