System information

Command Line Configuration
PHSETUP Access parameters
The following PHSETUP parameters correspond to the "Access tab" settings in PC-Duo
Host.
Parameter
Definition
access:permit
access:locked
access:time
Set access restrictions.
Set to permit to allow
access to the Host
computer after security is
checked.
Set to locked to deny all
remote control access to the
Host computer.
Set to time to require a
timezone setting (that
you must also specify).
granttime:number
Set the number of seconds
allowed for the Host
computer to grant or deny
access. Set this number
between 1 and 999.
permission:none
permission:request
permission:grant
Set connection permissions.
Set to none (default PC-
Duo Host behavior) if you
do not require permission
for remote access.
Set to request to request
a Host computer user for
access within a specified
time.
Set to grant to request the
Host computer to deny user
for access within a specified
time, or access is permitted.
If you set request or
grant, you must also
specify the requesttime
or granttime.
lockworkstationondefault:
yes|no
By default, this setting is set
to yes to automatically lock
workstation if access
permission is not granted.
Set this to no to prevent
workstation from being
locked.
requesttime:number
Set the number of seconds
during before time-out for
the consideration of a
remote control request to