System information

PC-Duo Master Guide
94
There are five sections in the Keyboard Mapping window:
 “Commands”
 “Accelerator and Special Hot Key”
 “Restore Default”
 “Remove”
 “Restore All”
Commands
The Commands list shows the commands available for mapping. A text description of the
currently selected command is shown under Selected Command. The currently mapped
key, which when pressed will invoke the command, is described under Accelerator.
Figure above illustrates the TOGGLE FULL SCREEN accelerator key combination mapped to
the Remote F11 command. This means that when the Master Connection Window has
the focus and the user presses the F11 key, the Host computer will be sent F11, which
will have the effect of opening the full screen on the Host computer.
Accelerator and Special Hot Key
To modify the key combination in the Accelerator field, place the cursor in the Accelerator
field and simple press the desired key combination. The text description of the key
combination will automatically appear. To specify special hot key combinations, which
you cannot normally type because the system will immediately interpret them using the
default meaning, such as ALT+TAB, CLICK Special Hot Key to open the Special Hot Key
window.
.
In the Keyboard Definition section, select the keys you want to use and click OK to return
to the Keyboard Mapping window. The Accelerator field shows the new key combination.
Remove
To remove a key mapping, select the command in the Commands list and click Remove.
Restore Default
To restore a key mapping to its default setting, select the command in the Commands list
and click Restore Default.