System information
Master Operation
61
Enter a name for the Gateway in the Display Name box.
Select a connection protocol from the Protocol list.
Select a standard Port or type in a port number.
NOTE: The default port number for SSL protocol is 443. Both TCP and SSL cannot listen
on the same port, and must therefore be configured for distinct ports. The default
<Standard> Gateway port number for TCP and UDP is 2303.
Identify the Gateway in the Gateway Specifier text box with either of the following
methods:
Type the server name, DNS name, or network IP address
Click Find Gateway to open the Find Gateway Wizard, which walks you through the
steps to find a Gateway.
4 If you want to change the default Protocol or Port, select another choice from the list.
See “Connection tab” for details.
5 In the Connect As tab, there are two login options for connecting to the Gateway:
Leave the default, Use logged-in username and password, to accept the existing user
login credentials.
Select Use the following username and password and type a different User name and
Password to change the login credentials.