System information

PC-Duo Master Guide
52
1 From the Manage Polling Ranges window, select Local Network UDP/IP and click New.
The Polling Ranges Definition window appears.
2 Select Poll single computer (at one IPv6 address).
3 Enter the address of the computer in your desired network polling range in the
Address box.
4 Enter a name for the search in the Descriptive Name box.
5 To specify a UDP port number to use for polling, enter it in the Port field. The default
<Standard> port is 1505.
6 To omit the search from the Ranges list located on the Peer-to-Peer Hosts tab, click
Hide this range on the Peer-to-Peer Hosts page.
7 Save your search using one of the following methods:
 Click Apply to save changes and leave the Polling Range Definition window open.
 Click OK to save changes and close the Polling Range Definition window.
Group one or more saved searches
Two or more searches can be grouped together to poll for Host computers. The result of
using a polling group is that the combined results appear in a single list on the Peer-to-
Peer Hosts tab. For example, polling groups can be used to combine the results of