Installation guide

Gateway Operation

computers to which you assign the same access and control policy for one or more

users.

 Assign the access and control rights to individual users, or to (domain) groups of

users. In particular, if users who connect to the PC-Duo Gateway via PC-Duo Master are

not in the Administrators group, you must, at minimum, assign access rights to the PC-

Duo Gateway according to ―Gateway Security‖. These access and Host computer view

rights must be assigned to all users who expect to connect to remote Host computers

through the PC-Duo Gateway.

 Check the results of any policies you assign for a selected Host computer listed under

any group under Managed Hosts by double-clicking the Host computer and selecting the

Effective Security tab.

7 Install PC-Duo Master on any computer from which you require remote access or

control. Configure Gateway-managed access from the Managed Hosts tab of the PC-Duo

Master window. Any user of PC-Duo Master expecting to connect to the PC-Duo

Gateway must have access rights to connect to the PC-Duo Gateway, and viewing rights

for any Host computers to which they are expected to connect. With the default settings,

such rights are automatically granted to any users in the PC-Duo Gateway administrators

group. The Managed Hosts tab lists the Host computers to which the user can connect

(through the selected PC-Duo Gateway). See the PC-Duo Master documentation for

information on connecting to a PC-Duo Gateway from PC-Duo Master, and for listing the

relevant Host computers.

8 Any remote users with the proper access and control rights can now connect to a Host

computer through the PC-Duo Gateway from the Managed Hosts tab of the PC-Duo

Master window.

NOTE: This is the general procedure for configuring Gateway-managed access control.

Your procedure may be different, depending on your network and access requirements.

For example, you can configure a management approach that sends newly discovered

Host computers directly to Managed Hosts. See “General Settings” for configuration

information.