Full Product Manual

Periodic Service
10-7
 Gear shift lever pivot (spray type grease )
■ Checking engine start system
CAUTION
TO avoid personal injury
 Do not allow anyone near the vehicle
while testing.
 If the vehicle does not pass the test, do
not operate the vehicle.
◆ Preparation before testing
1. Place all control levers in the “NEUTRAL”
position.
2. Set the parking brake and stop the engine.
◆ Test gear shift range lever safety switch
1. Sit on the operator's seat.
2. Shift the gear shift range lever to: “L”, “H”,
“N” or REVERSE position.
3. Turn the key to “START” position.
4. The engine must not crank.
5. If it cranks consult your local dealer for this
service.
 Gear shift lever
 Accelerator pedal
■ Checking wheel bolt torque
CAUTION
To avoid personal injury
 Never operate vehicle with a loose wheel
bolts.
 Any tine these bolts are loosened they
should be retightened to the specified
torque.
 Check all bolts frequently and keep them
tight.
Check wheel bolts regularly especially when