Full Product Manual
Operating the Engine
7-2
2.
Set gear shift lever to the “NEUTRAL”
position.
Gear shift lever.
(L) Low Range
(H) High Range
(N) “Neutral” position
(R) “REVERSE”
3. Push the accelerator pedal down slowly.
Speed control pedal
② INCREASE
“DECREASE
4. Insert the key into the key switch and turn it
to:
OFF (Stop the Engine)
ON (Engine runs or headlights on)
START (Start the Engine)
◆ Engine and other Check Lamps:
The parking brake warning lamp (1 parking
brake) comes on while parking brake is
applied and goes off when it is released.
IMPORTANT :
Relying on the engine warning lights is never
enough. Never fail to conduct daily checks
carefully by referring to Pre Operation Check
“ in “PERIODIC SERVICE” section.