Full Product Manual

Safe Operation
2-4
10.Maintenance
Stop the vehicle and park it on level ground. Pull the
parking brake and remove all cargo. Place shift lever
in the ā€œNā€ position, stop the engine and remove the
key.
1. When working next to the engine, exhaust or
radiator, work only after it has cooled down.
2. Wait for the engine to stop running and cool
down before checking the coolant level.
Otherwise, you could be burned by hot fluid or
steam.
3. No smoking when adding electrolyte or
refueling. Fuel tank and battery should be kept
away from sparks. Battery produces hydrogen
and oxygen during charging and this could
accelerate the risk of explosion.
4. Read and follow the instructions before
replacing the battery.
5. During maintenance, first aid kits and fire
extinguishers should be placed at your
fingertips.
6. During maintenance, you should disconnect the
battery cables.
ā‘ 
Battery
7. Do not open radiator cap before coolant has
cooled down. When the coolant is cold, open
slowly and let the coolant pressure reduced,
and then open radiator cap. Check for the
coolant level in the coolant reservoir. If
necessary, add coolant.
8. Tires should be mounted on rims with special
equipment, only by professionals.
9. Keeping specified tire pressure to ensure
driving safety.
10. Elevate the vehicle and place a suitable stand
under the frame when removing the wheels. Be
sure to re-tighten the wheel nuts to the
specified torque.