User's Manual

We-Connect We-Connect
We-Connect
We-Connect
Bluetooth Internet
Wi-Fi/
3G/4G/
LTE
5s
5s
Step 2: enjoyStep 1: clean Step 3: charge
Enjoy up to 2 hours of play with
every charge. When it’s time for
 recharge, place charger on
magnetic pins. After 90 minutes,
your toy is ready to go!
Vector comes paired to
the remote out of the box.
To pair Vector to We-Connect,
follow the in-app pairing instructions
on your app-enabled device.
Press and hold the control button
for 5 seconds. Vector vibrates twice
and the LED will flash when Vector is
in pairing mode.
Once paired, Vector will vibrate
three times.
Step 4: pair your toy
Rinse Vector with warm water
and  premium toy cleaner,
dry with  lint-free cloth.
Vector is designed to be adjusted to
t you. You can make small adjustments
to the position of Vectors internal perineum
stimulator at the adjustability point indicated
by the dot in the illustration.
For removing Vector allow the anal muscles
to relax and gently pull on the base.
Apply  water-based lubricant
to the prostate stimulator and
your anus. Slowly insert the
stimulator, allowing the anal
muscles time to relax
and stretch without pain.
Vector can only pair to
one remote or app-enabled
device at  time.
After exiting the We-Connect app, press and
hold the control button on Vector for 5 seconds.
The LED will start flashing. Hold the We-Vibe
button on your We-Vibe remote for another
5 seconds.
Once paired, Vector will vibrate 3 times and
LED will stop flashing.
To play long distance, both you and
your partner need the We-Connect app
on your smartphones. Vector is then
paired to the phone that remains within
Bluetooth range.
03 04 0605
07 08 09
90 min
waterproof
(IPX7)
Same room play
Long distance play
Step 5: battery
To change the battery in your remote,
simply pull o the bottom cap and lift
the battery out. Replace it with  non-
rechargeable CR2032 button cell battery.
splashproof
(IPX4)