User's Manual

User Manual User Guide
3.7 Power Electronics Protocol Input/Output Identifiers
The vSECC hardware offers the following ports, which can be controlled over ethernet via
the Power Electronics Protocol (PEP) getInput and setOutput messages:
> 16 Digital Out Ports
> 8 Digital In Ports
> 2 Analog In Ports
> 9 Temperature In Ports
Refer to the PEP document provided with the vSECC documentation package for usage
instructions.
3.7.1 Digital Out
The digital output ports can be set with the setOutput message. Valid values are 0 for logical
low, and 1 for logical high.
Identifier Connector Pin
d1 X306 25
d2 X306 24
d3 X306 23
d4 X306 22
d5 X306 21
d6 X306 20
d7 X306 19
d8 X306 18
d9 X306 17
d10 X306 16
d11 X306 15
d12 X306 14
d13 X306 13
d14 X306 12
d15 X306 11
d16 X306 10
© Vector Informatik GmbH Version 1.2.0 43