User's Manual

User Manual User Guide
Connector/
DinChargingMode
If the EV requested charging according to DIN 70121, this
variable defines which EnergyTransferType is supported by
the vSECC. Possible values are:
DC_extended: DC charging using the extended pins of
an IEC 62196-3 Configuration EE or Configuration FF
connector.
DC_core: DC charging using the core pins of an IEC 62196-
3 Configuration CC connector (corresponding to an IEC
62196-2 Type 1 connector) or of an IEC 62196-3 Configu-
ration DD connector (corresponding to an IEC 62196-2 Type
2 connector).
Default: DC_extended
Charging-
CommunicationCtrlr/
AbortOnInvalidRequest-
Current
At charging initialization, the EV and EVSE exchange their
upper and lower limits for current, voltage and power. If the
EV requests a current outside the current limits told by the
EVSE, and this variable is set to true, the charging session
is aborted completely. If set to false, the charging session
continues, but the current supplied is reduced to be within
the power electronics’ limits.
Note: If the requested voltage could not be supplied, the
charging session is aborted.
Default: true
Charging-
CommunicationCtrlr/
AbortOnInvalidRequest-
Power
At charging initialization, the EV and EVSE exchange their
upper and lower limits for current, voltage and power. If the
EV requests a voltage and current that result in a requested
power outside the power limit told by the EVSE, and this vari-
able is set to true, the charging session is aborted completely.
If set to false, the charging session continues, but the current
supplied is reduced to be within the power electronics’ limits.
Note: If the requested voltage could not be supplied, the
charging session is aborted.
Default: true
PowerElectronics/
Type
If set to ”Simulation”, the vSECC communicates with an inter-
nal power electronics simulation. If set to ”Websocket”, the
vSECC will communicate with a PEP compliant websocket
server through its ethernet interface.
Default: Simulation
© Vector Informatik GmbH Version 1.2.0 39