User's Manual

User Manual User Guide

3.4 Firmware Update

Updating the vSECC’s firmware via OCPP utilizes the ”UpdateFirmware” messages. The

vSECC will download the firmware from the URI specified inside the CSMS’s request. After

a successful download, it will then install the firmware update and reboot. For further infor-

mation about the structure and usage of those messages, please refer to the OCPP 2.0.1

Part 2 - Specification document.

Inside vCharM, a firmware update can be requested via the ”Update Firmware” dialog as

seen in Figure 23. You can then upload the firmware file or specify the file’s location using an

URI. After scheduling the update to a certain point in time, the request is sent to the vSECC,

which initiates the update process.

Figure 23: vCharM Firmware Update