User's Manual

User Manual Installation Guide

2.2.4 X303 - CCS Charging Connector 1

Figure 6: vSECC connector: X303

This connector is used for CCS Charging at charging port 1. Only DC-charging is supported

yet which requires the following pins:

> Pin 7, CP1: Control Pilot line which corresponds to the respective pin of the first CCS

connector.

> Pin 8, PE: Protective Earth for CCS connector 1.

The following pins may be used in the future. For now, they are ignored:

> Pin 1, M1a: Required for AC-charging.

> Pin 2, M1b: Required for AC-charging.

> Pin 3, FB1: Required for AC-charging.

> Pin 5, PP1-PU: Not used.

> Pin 6, PP1: Proximity Pin. Not used.

Please be aware of the naming: The connector X303 which has the higher number

corresponds to the logical CCS connector 1.