User's Manual

User Manual Introduction
1.4.6 CSMS connectivity (OCPP)
> Supported CSMS protocols: OCPP 2.0.1
> Websocket based connection according to OCPP 2.0.1: Part 4 JSON over Web-
Socket is supported
> The ”Basic Implementation of OCPP 2.0” as defined in the OCPP 2.0 standard (OCPP
2.0.1: Part 0 Introduction) is supported
> It is possible to update the charging station password (OCPP 2.0.1 use case A01)
> It is possible to boot the charging station (OCPP 2.0.1 use cases B01 B04)
> It is possible to configure the charging station via a CSMS (OCPP 2.0.1 use cases B05
B07)
> It is possible to reset the charging station (OCPP 2.0.1 use cases B11 B12)
> Is it possible to authorize a driver using a start button and ISO 15118 External Identi-
fication Means (EIM) (OCPP 2.0.1 use cases C02 and C08)
> It is possible to start and stop transactions also while the charging station is offline and
end the charging process (OCPP 2.0.1 use cases E01 E01, E04, E06, E08 E09,
E11 E13, E15)
> It is possible to remotely stop transactions and the charging (OCPP 2.0.1 use cases
F03 F04)
> It is possible to remotely trigger messages (OCPP 2.0.1 use case F06)
> It is possible to change and report the availability of an EVSE and its connectors (OCPP
2.0.1 use cases G01 G04)
> It is possible to send transaction related meter values (OCPP 2.0.1 use case J02)
> It is possible to perform General Smart Charging (OCPP 2.0.1 use cases K01 K02,
K06 K07)
> It is possible to delete certificates from a charging station and to install CA certificates
(OCPP 2.0.1 use cases M04 M05)
> It is possible to upload log files (OCPP 2.0.1 use case N01) via HTTP/HTTPS protocol
> It is possible to support vendor-specific OCPP messages (OCPP 2.0.1 use cases P01
P02)
> Any non-supported messages are rejected
1.4.7 Power electronic control via Vector PEP
> Connection to power electronic via physical ethernet
> Communication based on websocket connection with JSON data exchange
> Usage of Vector’s PEP 1.2
© Vector Informatik GmbH Version 1.2.0 13