User's Manual
User Manual VC-EVCC
© 2021 Vector Informatik GmbH Version 1.3.0 72
5.2.1.2.8 Configuration of Charge Node Selection (Charging Arbitration)
The VC-EVCC provides the possibility to use charging arbitration which enables to run two
VC-EVCCs with different source addresses on the same CAN channel.
The service structure is defined as 1 byte.
Value
Description
0x00
Charging Arbitration is inactive (default)
0x01
Charging Arbitration is active
Note
An update of the parameter requires a reboot of the VC-EVCC to be applicable.
The diagnostic service “Write Data By Identifier” is only available in the application
extended session.