User's Manual

User Manual VC-EVCC
© 2021 Vector Informatik GmbH Version 1.3.0 226
7 Mechanical Characteristics
This section describes the housing and connector of the VC-EVCC.
Material: Die cast housing: ADC12
Metal sheet cover: AlMg3 (EN AW 5754)
Connector: Molex CMC 36 Hybrid sealed
Size: 156 x 145 x 40 mm
Weight: 455g (560g ± 5% including PCB)
IP protection class: IP6K6K / IP6K7 / IP6K9K
(not valid for unsealed evaluation hardware)
Mounting: 23550 mm² / 3 x M6
7.1 Connector
The following table lists the mating connector for the wiring harness and its necessary parts:
Housing
MOLEX, 0643202311
Wire Cap
MOLEX, 0643201301
Contacts
MOLEX, 0643221019
0,635mm Terminal 0,35mm²
MOLEX, 0643221039
0,635mm Terminal 0,50mm²
MOLEX, 0643231029
1,5mm Terminal 1,0mm²
MOLEX, 0643231039
1,5mm Terminal 2,0mm²
Blind Plug
MOLEX, 0643251010
0,635mm
MOLEX, 0643251023
1,5mm
Table 7-1 Mating Connector
Caution
The MOLEX connector does not provide sufficient protection against intruding water. It
is recommended by Vector to perform a risk assessment if additional measures are
necessary to protect the MOLEX connector.